No Show Diagonal Mesh

How to use No Show Diagonal Mesh Embroidery Backing:

1. Cut a piece of the embroidery backing at least one inch larger than the hoop
   
2. Hoop the embroidery backing to the back of the garment. When finished with the embroidery remove any larger areas of the mesh cutting to form rounded corners close to the design. If using the fusible version, after trimming close, refuse from the backside using a pressing cloth.
   
3. Add a tearaway for extra definition if desired. After the design is complete the tear away can be removed leaving just the soft mesh against the skin.
   
4. If it is a VERY dense design or above 20,000 stitches - use 2 layers of mesh criss-crossing the embossing patterns creating a perfect stability for those more dense designs.
   

How to use No Show Diagonal Mesh Fusible Embroidery Backing:

1. Cut a piece of the embroidery backing at least one inch larger than the hoop
   
2. Fuse the embroidery backing to the back of the garment. - use a low iron 260F setting
   
3. Hoop it and add a tearaway for extra definition. After the design is complete the tear away can be removed leaving just the soft mesh against the skin.
   
4. If it is a VERY dense design or above 20,000 stitches - use 2 layers of mesh cris -crossing the embossing pattern.
5. When your are finished stitching - re fuse- the edges - peel them back and trim.
   

No Show Diagonal Mesh Embroidery Backingis available in several roll sizes and colors:
Click here to visit our web store and purchase No Show Diagonal Mesh by the roll

No Show Diagonal Mesh Embroidery Backing is available in black or white 7.5" x 8" pre cuts:
Click here to visit our web store and purchase No Show Diagonal Mesh pre-cuts

No Show Diagonal Mesh Fusible Embroidery Backing is available in several roll sizes:
Click here to visit our web store and purchase No Show Diagonal Mesh Fusible by the roll

No Show Diagonal Mesh Fusible Embroidery Backing is available in white 8" x 8" white precuts:
Click here to visit our web store and purchase No Show Diagonal Mesh Fusible pre-cuts